HP certification HP0-Y19 exam training programs

We are all ordinary human beings. Something what have learned not completely absorbed, so that wo often forget. When we need to use the knowledge we must learn again. When you see ITCertKing's HP HP0-Y19 exam training materials, you understand that this is you have to be purchased. It allows you to pass the exam effortlessly. You should believe ITCertKing will let you see your better future. Bright hard the hard as long as ITCertKing still, always find hope. No matter how bitter and more difficult, with ITCertKing you will still find the hope of light.

ITCertKing is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because ITCertKing has a strong IT team of experts, they are committed to study exam questions and answers, and serve the vital interests of the majority of candidates. They use their own professional mind and experience to meet the needs of the candidates. According to the needs of the candidate, they consider the issue from all angles, and manufacturing applicability exam training materials. This material is HP HP0-Y19 exam training materials, which including questions and answers.

Exam Code: HP0-Y19
Exam Name: HP (ProCurve Accelerated ASE Mobility)
One year free update, No help, Full refund!
Total Q&A: 63 Questions and Answers
Last Update: 2013-11-19

HP HP0-Y19 is a certification exam to test IT expertise and skills. If you find a job in the IT industry, many human resource managers in the interview will reference what HP related certification you have. If you have HP HP0-Y19 certification, apparently, it can improve your competitiveness.

HP certification HP0-Y19 exam is the first step for the IT employees to set foot on the road to improve their job. Passing HP certification HP0-Y19 exam is the stepping stone towards your career peak. ITCertKing can help you pass HP certification HP0-Y19 exam successfully.

HP0-Y19 Free Demo Download: http://www.itcertking.com/HP0-Y19_exam.html

NO.1 You are planning a network upgrade at a small company. During a meeting, you learn that the
customer will install VoIP telephones that set Layer 2 priority markers for allvoice traffic, and the
VoIP traffic will not cross any routed links. What is necessary to ensure that ProVision ASIC
switches maintain the priorities set by the phones? (Selecttwo.)
A.LLDP-MED for all voice VLANs
B.an IEEE 802.1p-to-DSCP map for voice traffic
C.port-based priorities for ports connected to phones
D.default QoS settings
E.tagged links for all voice VLAN traffic
Correct:D E

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.2 Click the Exhibit button. What does this output from the show ip ospf neighbor command
indicate about the OSPF neighbor relationship between this router and the router with ID 10.3.0.1?
A.They are in different OSPF areas.
B.They have not formed an adjacency.
C.They are configured with different OSPF versions.
D.They are not eligible to be elected DR or BDR.
Correct:B

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.3 You must configure a ProCurve Switch 8212zl to be the Backup router for a VRID associated
with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A.It must be an address assigned to a multi-netted interface.
B.It must be an address that is not assigned to any interface on either router.
C.It must match the Backup router's address for the VLAN 10 interface.
D.It must match the Owner router's address for the VLAN 10 interface.
Correct:D

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.4 Click the Exhibit button. What is the role of this Switch 3500yl in the OSPF routing domain?
A.ASBR
B.virtual router
C.ABR
D.internal router
Correct:D

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.5 Which part of the multicast address range is reserved for applications that will remain within an
enterprise intranet?
A.Internetwork Control Block
B.AD-HOC Block
C.Administratively Scoped Address Block
D.Local Network Control Block
Correct:C

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.6 You configured VLAN 10 and VLAN 24 on a ProCurve Switch 3500yl-48G. The network servers
reside in VLAN 10, which has an IP address range of 10.1.10.0/24. Network clients reside in VLAN
24, which has an IP address range of 10.1.24.0/24. You configure an ACL with these entries and
apply it statically to ports in VLAN 24: permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq ftp
permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq http permit tcp 10.1.24.0 0.0.0.0
10.1.10.10 255.255.255.255 eq telnet What is the effect of these ACLs on the clients located in
VLAN 24?
A.They would have no access at all, because the ACL is misconfigured.
B.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but no access anywhere else.
C.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but full access to everything
else in the 10.1.10.0 subnet.
D.They could not access anything in the 10.1.10.0 subnet, because IP has not been specified in the ACL.
Correct:B

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.7 You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl.
The port is a member of a voice VLAN and also requires 802.1X authentication. How will
LLDP-MED and 802.1X interact?
A.The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED
information.
B.The switch will submit the phone's authentication credentials to a RADIUS server after the devices
exchange LLDP-MED information.
C.The switch will permit LLDP-MED communication with the phone after authentication is complete.
D.The switch will use information from the phone's first LLDP-MED frame to submit its authentication
credentials.
Correct:C

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.8 On a ProCurve Switch 8212zl, which feature must be enabled before you can enable VRRP?
A.MSTP
B.IP routing
C.IP multicast
D.RIP
Correct:B

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.9 You must configure Multiple Spanning Tree Protocol (MSTP) on two ProCurve 8212zl switches
and four 5406zl switches. Which configuration is necessary to ensure that all of the switches join
the same MST region?
A.The switches must have identical Port Priorities for shared links in each MST instance.
B.Bridge Priorities on all switches must be configured so that each MST instance has a different Root
Bridge.
C.All switch-to-switch links in each MST instance must be tagged members of all user VLANs.
D.The switches must be configured with identical config-names, config-revisions, and VLAN-to-instance
mappings.
Correct:D

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

NO.10 Port C1 on a ProCurve Switch 5412zl is a tagged member of VLAN 50 and an untagged member
of VLAN 1. Port C2 and port C3 are at default VLAN settings. What is the effect of the following
command entered at the CLI? 5412zl(config)# trunk c1-c3 trk1
A.The trunk is defined as an untagged member of VLAN 1, but port C1 is not included.
B.The trunk is not defined, because the ports' VLAN memberships do not match.
C.The trunk is defined as an untagged member of VLAN 1 and a tagged member of VLAN 50.
D.The trunk is defined as an untagged member of VLAN 1 but is not a member of VLAN 50.
Correct:D

HP   HP0-Y19   HP0-Y19 certification   HP0-Y19 test answers

ITCertKing offer the latest 000-318 exam material and high-quality C_TADM51_70 pdf questions & answers. Our C_TADM53_70 VCE testing engine and 644-068 study guide can help you pass the real exam. High-quality 74-343 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP0-Y19_exam.html